產品[
SensAlarm Plus
]資料
如果您對該產品感興趣的話,可以
產品名稱:
SensAlarm Plus
產品型號:
SensAlarm Plus
產品廠商:
其它品牌
產品文檔:
無相關文檔
簡單介紹
SensAlarm Plus
所有功能于一個氣體監視器。
先進的單點氣體檢測系統。
1或2個雙閃光燈閃光,喇叭,和復位。
選購電池備用。
加智能傳感器。
百分比剩余傳感器壽命。
自動識別和配置。
上傳氣體/報警應用程序數據。
時間標記報警和校準數據。
靈活的安裝或維修。
非侵入性配置/維護界面。
遙感器/放氣,管道安裝或樣品**。
安裝傳感器高達100英尺,4芯電纜遠離
SensAlarm Plus的詳細介紹
SensAlarm Plus
所有功能于一個氣體監視器。
先進的單點氣體檢測系統。
1或2個雙閃光燈閃光,喇叭,和復位。
選購電池備用。
加智能傳感器。
百分比剩余傳感器壽命。
自動識別和配置。
上傳氣體/報警應用程序數據。
時間標記報警和校準數據。
靈活的安裝或維修。
非侵入性配置/維護界面。
遙感器/放氣,管道安裝或樣品**。
安裝傳感器高達100英尺,4芯電纜遠離
The Advanced All-In-One Point Gas Monitoring System
- All-In-One Gas Monitor
- Advanced Single Point Gas Detection System
- 1 or 2 Double-flash Strobes, Horn, and Reset
- Optional Battery Back-up
- Intelligent Plus Sensors
- Percent Remaining Sensor Life
- Auto-recognition and Configuration
- Uploads Gas Application Data / Alarms
- Time-stamped Alarm and Calibration Data
- Flexible Installation or Maintenance
- Non-intrusive Configuration / Maintenance Interface
- Remote Sensor / Gassing, Duct Mount or Sample Draw
- Mount Sensor up to 100 Feet Away with 4 Conductor Cable
SensSensAlarm Plus is a complete gas detection system in one enclosure. The system is fully equipped with strobe, horn, high-visibility four-digit LED Display and LCD Display / Interface. At the core of SensAlarm Plus is an advanced Intelligent Sensor platform with non-volatile memory for all key application variables and sensor data. A non-intrusive user interface enables operational customization and access to sensor life parameters, TWA alarms, calibration data and other information with date and time recording.
The SensAlarm Plus sensor head is universal in that it accepts all Sensidyne Plus sensors. Monitoring in high, low or adjacent locations is simplified by remote mounting the sensor head using 4 conductor cable. The automatic uploading of variables, alarm values and sensor information when a sensor is plugged in greatly simplifies installation and maintenance. Transportable calibration allows sensor calibration at the point of installation or in a workshop, then hot-swapping the sensor in the field.
SensAlarm Plus is the ideal gas monitoring solution for labs, gas cylinder storage, industrial work areas, control room protection or any other applications where users benefit from a packaged gas detection system that works with all
SensAlarm Plus Battery Back-up Option
SensAlarm Plus, the advanced all-in-one single point gas monitoring system, is available with battery back-up. This feature provides protection for your employees and facility during instances of power loss. When power goes down SensAlarm Plus continues to protect your employees and facility for up to 60 minutes.
SensAlert Plus sensors.


SensAlarm Plus is part of the SensAlert Series of gas detectors.
Discover SensAlarm Plus
Available sensors for SensAlarm Plus
SensAlarm Documentation
Application Support